+44(0)1279 638 700

NBS Plus 152x152
BALI
Ferfalogo
Union Jack Logo
resin bound on tarmac 3000x1000 copy

Design Guidance for Asphalt Concrete Systems

Rural Pathways - Asphalt Concrete - SuDS Compliant

SuDS Compliant Permeable Construction Rural Pathways, Asphalt Concrete

EcoBound Resin Bound Surfacing

EcoBound Resin Bound Surfacing minimum 15mm thickness (5 or 6mm aggregate) with optional EcoBound Resin Bound Surfacing Anti-Slip Aggregate

 

Binder Course 

50mm minimum depth of AC14 open graded asphalt concrete (macadam) maximum 100/150 pen binder to BS EN 13108-1.

 

Granular Sub-base

175mm minimum well compacted Type 3 granular sub-base or similar approved

 

Optional Impermeable Membrane

Impermeable membrane to carry water to infiltration/storage system

or

Optional Geotextile Layer

Geotextile layer to prevent upward migration of soil

 

Capping Layer

If required, depending on sub-grade condition

 

Sub-grade   


The above information is produced for guidance only, the designer/ contractor should be satisfied that the construction is suitable for the expected traffic and ground conditions. Guidance about thickness and type of asphalt concrete has been provided by an asphalt supplier and while due care has been taken to ensure the information is correct, it is not the responsibility of Eco Resin Bound Limited to design this or any other element of the construction.

Rural Pathways - Asphalt Concrete

Asphalt Concrete (Macadam) Construction for Rural Pathways

EcoBound Resin Bound Surfacing

EcoBound Resin Bound Surfacing minimum 15mm thickness (5 or 6mm aggregate) with optional EcoBound Resin Bound Surfacing Anti-Slip Aggregate

 

Binder Course 

50mm minimum depth of AC14 dense asphalt concrete (macadam) maximum 100/150 pen binder to BS EN 13108-1.

 

Granular Sub-base

125mm minimum well compacted Type 1 granular sub-base or similar approved

 

Optional Geotextile Layer

Geotextile layer to prevent upward migration of soil

 

Capping Layer

If required, depending on sub-grade condition

 

Sub-grade   


The above information is produced for guidance only, the designer/ contractor should be satisfied that the construction is suitable for the expected traffic and ground conditions. Guidance about thickness and type of asphalt concrete has been provided by an asphalt supplier and while due care has been taken to ensure the information is correct, it is not the responsibility of Eco Resin Bound Limited to design this or any other element of the construction.

Urban Pathways - Asphalt Concrete - SUDS Compliant

SuDS Compliant Permeable Construction Urban Pathways, Asphalt Concrete

EcoBound Resin Bound Surfacing

EcoBound Resin Bound Surfacing minimum 15mm thickness (5 or 6mm aggregate) with optional EcoBound Resin Bound Surfacing Anti-Slip Aggregate

 

Binder Course 

50mm minimum depth of AC14 open graded asphalt concrete (macadam) maximum 100/150 pen binder to BS EN 13108-1.

 

Granular Sub-base

175mm minimum well compacted Type 3 granular sub-base or similar approved

 

Optional Impermeable Membrane

Impermeable membrane to carry water to infiltration/storage system

or

Optional Geotextile Layer

Geotextile layer to prevent upward migration of soil

 

Capping Layer

If required, depending on sub-grade condition

 

Sub-grade   


The above information is produced for guidance only, the designer/ contractor should be satisfied that the construction is suitable for the expected traffic and ground conditions. Guidance about thickness and type of asphalt concrete has been provided by an asphalt supplier and while due care has been taken to ensure the information is correct, it is not the responsibility of Eco Resin Bound Limited to design this or any other element of the construction.

Urban Pathways - Asphalt Concrete

Asphalt Concrete (Macadam) Construction for Urban Pathways

EcoBound Resin Bound Surfacing

EcoBound Resin Bound Surfacing minimum 15mm thickness (5 or 6mm aggregate) with optional EcoBound Resin Bound Surfacing Anti-Slip Aggregate

 

Binder Course 

50mm minimum depth of AC14 dense asphalt concrete (macadam) maximum 100/150 pen binder to BS EN 13108-1.

 

Granular Sub-base

150mm minimum well compacted Type 1 granular sub-base or similar approved

 

Optional Geotextile Layer

Geotextile layer to prevent upward migration of soil

 

Capping Layer

If required, depending on sub-grade condition

 

Sub-grade   


The above information is produced for guidance only, the designer/ contractor should be satisfied that the construction is suitable for the expected traffic and ground conditions. Guidance about thickness and type of asphalt concrete has been provided by an asphalt supplier and while due care has been taken to ensure the information is correct, it is not the responsibility of Eco Resin Bound Limited to design this or any other element of the construction.

Driveways (straight in and out) - Asphalt Concrete - SuDS Compliant

SuDS Compliant Permeable Construction for Drives (Drive on – Drive off), Asphalt Concrete

EcoBound Resin Bound Surfacing

EcoBound Resin Bound Surfacing minimum 15mm thickness (5 or 6mm aggregate) with optional EcoBound Resin Bound Surfacing Anti-Slip Aggregate

 

Binder Course 

60mm minimum depth of AC14 open graded asphalt concrete (macadam) maximum 100/150 pen binder to BS EN 13108-1.

 

Granular Sub-base

200mm minimum well compacted Type 3 granular sub-base or similar approved

 

Optional Impermeable Membrane

Impermeable membrane to carry water to infiltration/storage system

or

Optional Geotextile Layer

Geotextile layer to prevent upward migration of soil

 

Capping Layer

If required, depending on sub-grade condition

 

Sub-grade   


The above information is produced for guidance only, the designer/ contractor should be satisfied that the construction is suitable for the expected traffic and ground conditions. Guidance about thickness and type of asphalt concrete has been provided by an asphalt supplier and while due care has been taken to ensure the information is correct, it is not the responsibility of Eco Resin Bound Limited to design this or any other element of the construction.

Driveways (straight in and out) - Asphalt Concrete

Asphalt Concrete (Macadam) Construction for Drives (Drive on – Drive off)

EcoBound Resin Bound Surfacing

EcoBound Resin Bound Surfacing minimum 15mm thickness (5 or 6mm aggregate) with optional EcoBound Resin Bound Surfacing Anti-Slip Aggregate

 

Binder Course 

60mm minimum depth of AC14 dense asphalt concrete (macadam) maximum 100/150 pen binder to BS EN 13108-1.

 

Granular Sub-base

150mm minimum well compacted Type 1 granular sub-base or similar approved

 

Optional Geotextile Layer

Geotextile layer to prevent upward migration of soil

 

Capping Layer

If required, depending on sub-grade condition

 

Sub-grade   


The above information is produced for guidance only, the designer/ contractor should be satisfied that the construction is suitable for the expected traffic and ground conditions. Guidance about thickness and type of asphalt concrete has been provided by an asphalt supplier and while due care has been taken to ensure the information is correct, it is not the responsibility of Eco Resin Bound Limited to design this or any other element of the construction.

Driveways (turning vehicles) - Asphalt Concrete - SuDS Compliant

SuDS Compliant Permeable Construction for Drives (Turning vehicles), Asphalt Concrete

EcoBound Resin Bound Surfacing

EcoBound Resin Bound Surfacing minimum 15mm thickness (5 or 6mm aggregate) with optional EcoBound Resin Bound Surfacing Anti-Slip Aggregate

 

Binder Course 

60mm minimum depth of AC14 open graded asphalt concrete (macadam) maximum 100/150 pen binder to BS EN 13108-1.

 

Granular Sub-base

200mm minimum well compacted Type 3 granular sub-base or similar approved

 

Optional Impermeable Membrane

Impermeable membrane to carry water to infiltration/storage system

or

Optional Geotextile Layer

Geotextile layer to prevent upward migration of soil

 

Capping Layer

If required, depending on sub-grade condition

 

Sub-grade   

 

The above information is produced for guidance only, the designer/ contractor should be satisfied that the construction is suitable for the expected traffic and ground conditions. Guidance about thickness and type of asphalt concrete has been provided by an asphalt supplier and while due care has been taken to ensure the information is correct, it is not the responsibility of Eco Resin Bound Limited to design this or any other element of the construction.

Driveways (turning vehicles) - Asphalt Concrete

Asphalt Concrete (Macadam) Construction for Drives (Turning vehicles)

EcoBound Resin Bound Surfacing

EcoBound Resin Bound Surfacing minimum 15mm thickness (5 or 6mm aggregate) with optional EcoBound Resin Bound Surfacing Anti-Slip Aggregate

 

Binder Course 

60mm minimum depth of AC14 dense asphalt concrete (macadam) maximum 100/150 pen binder to BS EN 13108-1.

 

Granular Sub-base

150mm minimum well compacted Type 1 granular sub-base or similar approved

 

Optional Geotextile Layer

Geotextile layer to prevent upward migration of soil

 

Capping Layer

If required, depending on sub-grade condition

 

Sub-grade

 

The above information is produced for guidance only, the designer/ contractor should be satisfied that the construction is suitable for the expected traffic and ground conditions. Guidance about thickness and type of asphalt concrete has been provided by an asphalt supplier and while due care has been taken to ensure the information is correct, it is not the responsibility of Eco Resin Bound Limited to design this or any other element of the construction.

Car Parks - Asphalt Concrete - SuDS Compliant

SuDS Compliant Permeable Construction for Car Parks, Asphalt Concrete suitable for cars & light delivery vehicles

EcoBound Resin Bound Surfacing

EcoBound Resin Bound Surfacing minimum 18mm thickness with optional EcoBound Resin Bound Surfacing Anti-Slip Aggregate

 

Binder Course 

90mm minimum depth of AC14 open graded asphalt concrete (macadam) maximum 100/150 pen binder to BS EN 13108-1.

 

Granular Sub-base

300mm minimum well compacted Type 3 granular sub-base or similar approved

 

Optional Impermeable Membrane

Impermeable membrane to carry water to infiltration/storage system

or

Optional Geotextile Layer

Geotextile layer to prevent upward migration of soil

 

Capping Layer

If required, depending on sub-grade condition

 

Sub-grade  

 

The above information is produced for guidance only, the designer/ contractor should be satisfied that the construction is suitable for the expected traffic and ground conditions. Guidance about thickness and type of asphalt concrete has been provided by an asphalt supplier and while due care has been taken to ensure the information is correct, it is not the responsibility of Eco Resin Bound Limited to design this or any other element of the construction.

Car Parks - Asphalt Concrete

Asphalt Concrete (Macadam) Construction for Car Parks - suitable for cars & light delivery vehicles

EcoBound Resin Bound Surfacing

EcoBound Resin Bound Surfacing minimum 18mm thickness with optional EcoBound Resin Bound Surfacing Anti-Slip Aggregate

 

Binder Course 

70mm minimum depth of AC14 dense asphalt concrete (macadam) maximum 100/150 pen binder to BS EN 13108-1.

 

Granular Sub-base

150mm minimum well compacted Type 1 granular sub-base or similar approved

 

Optional Geotextile Layer

Geotextile layer to prevent upward migration of soil

 

Capping Layer

If required, depending on sub-grade condition

 

Sub-grade


The above information is produced for guidance only, the designer/ contractor should be satisfied that the construction is suitable for the expected traffic and ground conditions. Guidance about thickness and type of asphalt concrete has been provided by an asphalt supplier and while due care has been taken to ensure the information is correct, it is not the responsibility of Eco Resin Bound Limited to design this or any other element of the construction.

Access Roads - Asphalt Concrete - SuDS Compliant

SuDS Compliant Permeable Construction for Access Roads suitable for cars & light delivery vehicles

EcoBound Resin Bound Surfacing

EcoBound Resin Bound Surfacing minimum 18mm thickness with optional EcoBound Resin Bound Surfacing Anti-Slip Aggregate

 

Binder Course 

60mm minimum depth of AC14 open graded asphalt concrete (macadam) maximum 100/150 pen binder to BS EN 13108-1.

 

Base Course

150mm minimum depth AC20 open graded asphalt concrete (2 layers). Maximum 100/150 pen binder to BS EN 13108-1.

 

Granular Sub-base

300mm minimum well compacted Type 3 granular sub-base or similar approved

 

Optional Impermeable Membrane

Impermeable membrane to carry water to infiltration/storage system

or

Optional Geotextile Layer

Geotextile layer to prevent upward migration of soil

 

Capping Layer

If required, depending on sub-grade condition

 

Sub-grade


The above information is produced for guidance only, the designer/ contractor should be satisfied that the construction is suitable for the expected traffic and ground conditions. Guidance about thickness and type of asphalt concrete has been provided by an asphalt supplier and while due care has been taken to ensure the information is correct, it is not the responsibility of Eco Resin Bound Limited to design this or any other element of the construction.

Access Roads - Asphalt Concrete

Asphalt Concrete (Macadam) Construction for Access Roads suitable for cars & light delivery vehicles

EcoBound Resin Bound Surfacing

EcoBound Resin Bound Surfacing minimum 18mm thickness with optional EcoBound Resin Bound Surfacing Anti-Slip Aggregate

 

Binder Course 

60mm minimum depth of AC14 dense asphalt concrete (macadam) maximum 100/150 pen binder to BS EN 13108-1.

 

Base Course

150mm minimum depth AC20 asphalt concrete (2 layers. )Maximum 100/150 pen binder to BS EN 13108-1.

 

Granular Sub-base

150mm minimum well compacted Type 1 granular sub-base or similar approved

 

Capping Layer

If required, depending on sub-grade condition

 

Sub-grade


The above information is produced for guidance only, the designer/ contractor should be satisfied that the construction is suitable for the expected traffic and ground conditions. Guidance about thickness and type of asphalt concrete has been provided by an asphalt supplier and while due care has been taken to ensure the information is correct, it is not the responsibility of Eco Resin Bound Limited to design this or any other element of the construction.